BCGTB - 222070, HOSE ASSEMBLY LUBRICANT
- MSDS: BCGTB
- Manufacturer: SCOT LABORATORIES
- Product Name: 222070, HOSE ASSEMBLY LUBRICANT
- National Stock Number: 9150-00N000976
Product Identification
Product ID:222070, HOSE ASSEMBLY LUBRICANT
MSDS Date:07/13/1989
FSC:9150
NIIN:00N000976
MSDS Number: BCGTB
Responsible Party
CHAGRIN FALLS, OH 44022
US
Emergency Phone: 216-543-3033
Info Phone: 216-543-3033
Cage: OO271
Contractor
Telephone: 216-543-3033
Cage: OO271
Ingredients
PETROLEUM HYDROCARBONS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED CONTACT MAY CAUSE
DERMATITUS. POSSIBLE IRRITANT FOR EYE CONTACT. HARMFUL IF
SWALLOWED.
Effects of Overexposure:MAY CAUSE IRRITATION.
First Aid
First Aid:EYE: FLUSH WITH WATER FOR 15 MINUTES. IF IRRITATION PERSISTS,
CONSULT A PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. REMOVE
CONTAMINATED CLOTHING. LAUNDER BEFORE REUSE. INHALE: REMOVE TO
FRESH AIR. INGE ST: DO NOT INDUCE VOMITTING. CONSULT A PHYSICIAN.
Fire Fighting
Flash Point:405-500F
Extinguishing Media:DRY CHEMICAL,CO*2 FOAM
Fire Fighting Procedures:AVOID BREATHING FUMS
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:WIPE UP OR SCOOP UP.PLACE IN PLANT OIL
POLLUTION CONTROL SYSTEM.SOAK UP WITH ABSORBENT FLOOR COMPOUND.
Handling
Handling and Storage Precautions:HANDLE AND STORE AS WITH ANY
INDUSTRIAL LUBRICATING OIL
Other Precautions:NONE
Exposure Controls
Respiratory Protection:NORMALLY NOT REQUIRED.
Ventilation:USE LOCAL EXHAUST WITH MECHANICAL VENTILATION IF TLV IS
EXCEEDED.
Protective Gloves:RECOMMENDED FOR PROLONGED CONATCT.
Eye Protection:GOGGLES.
Supplemental Safety and Health
P.O. BOX 167, CHAGRIN FALLS, OHIO 44022.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:574-878F
Vapor Pres:01
Spec Gravity:0.89
Evaporation Rate & Reference:0.1 BUTYL
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR AMBER LIQUID, PETROLEUM ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
DO NOT MIX WITH OTHER MATERIAL. FOLLOW DIRECTIONS ON LABEL.
Stability Condition to Avoid:AVOID CONTACT WITH STRONG OXIDIZING
AGENTS;OPEN FLAMES
Disposal
Waste Disposal Methods:INCINERATE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.